MODELING AND CAM SIMULATION FOR MANUFACTURING OF 3D SHROUDED IMPELLER USED IN CENTRIFUGAL COMPRESSOR
Keywords:
3D shrouded Impeller of centrifugal compressor, NX CAD/CAM, CNC simulationAbstract
Impeller is the most fundamental component of any turbo machinery, the complexity of its design varies from application point of view. Design and manufacturing of such components is a research interest with varying difficulty in the component geometries with complexity and between ranges of materials. To accomplish such complex task engineers need knowledge of design for manufacturing kind of tools which equips latest processes like scoop milling technology. To implement such new technologies one needs a pre planning right yet from design phase. To accommodate such complications in design phase tools like NXCAD and NXCAM modules has been used for modelling and tool path generation which is used to simulate manufacturing of a 3D shrouded impeller used in centrifugal compressor to alter the flow of fluids (gasses/ liquids). A three dimensional shrouded impeller has been modelled using NX CAD and tool path has been generated in view to simulate the manufacturing profiles of scoop milling process with the guided programmable pre and post processing by using NX CAM. By using this simulation, manufacturing of parts produced by CNC machine in computer can be virtually simulated which provides error free manufacturing of impeller from block to functional part.
Downloads
Metrics
References
Rong-ShineLin Y and Korenet (1996), “Efficient Tool-Path Planning for machining free-form Surfaces”, Journal of Engineering for Industry, Vol.118, 21 – 28.
Shang-Liangchen and Wes–Tsai wang (2001), “Computer aided manufacturing technologies for centrifugal compressor impellers”, Journal of materials processing technology, Vol. 115, 284 – 293.
C. Tung and P-L Tso (2011), “Tool path generation and manufacturing process for Blades of a compressor rotor”. International Journal of Mechanical, Vol. 5 (4), 743 – 748.
Antonio Piratelli-Filho, Pedro Henrique Jobim Souza, and Walter Gennari Junior (2012), “Study of CAD/CAM processing of Free-Form Surfaces”, Journal of ABCM Symposium series in Mechatronics – Vol. 05, 889 – 898.
Hsi – Yung Feng and Huiwen Li (2002), “Constant scallop- height tool path generation for three-axis sculptured surface machining”. Journal of Computer-Aided Design, Vol. 34, 647 – 654.
Geng Lin, Zhang Yunfeng and Lee Kim Seng (2012), “Generation of smooth five axis tool paths for finish cut of freeform surfaces with PSO”. International Journal of Engineering Innovation and Management, Vol. 2, 25 – 32.
Hyoun-chil Jung, Hwang – Jinson. (2012), “Development of tool-path generation module for 5-axis control machining of impellers”, J. Cent. South Univ., Vol. 19, pp. 3424−3429. DOI: 10.1007/s11771-012-1424-4
“Unigraphics solutions user manual” (2015), Vol. 1, 2.
Vratraj K Joshi, Desai K P and Raval H K (2016) , “CNC Milling Of Impeller Blade By Macro Programming”, Journal of Manufacturing Engineering, Vol. 11 (3), 135-140.
