LAPPING COST MODEL: AN EFFECTIVE TOOL TO CALCULATE FINISHING PROCESS COST

Authors

  • Pankaj Singh Routela Department of Mechanical Engineering, YMCA University of Science & Technology, Faridabad, Haryana-121006 https://orcid.org/0000-0002-4871-637X
  • Navdeep Malhotra Department of Mechanical Engineering, YMCA University of Science & Technology, Faridabad, Haryana-121006.
  • Ashok Kaliyaperumal Department of DBS-SCPCM, Danfoss Industries Pvt. Ltd., SIPCOT Industrial growth center, Oragadam, Tamilnadu-602105

Keywords:

Lapping, Machining cost, Value-based negotiation (VBN), Product Cost Management

Abstract

In this paper, cost model for the lapping process is developed and used for analyzing the cost involved in this process. Lapping process was studied by means of experiments, literature survey and by visiting suppliers of the lapping machines. The results from the experiments, information from the suppliers and past experiments by the researchers were explored in details and used to develop the relations among potential parameters and to see the possibility of the lapping process cost model development. Cost analysis of the valve plate (a component of axial piston closed circuit pump) is also studied. A comparison between the results and the market price reveals the hidden savings potential in the process.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

References

Le Xiaobin and Peterson M L (1999), “Material removal rate in flat lapping” Journal of Manufacturing Process, Vol.16(1), 71– 78.

Lalit Suhas Deshpande, Shiv Kumar Raman and Owat Sunanta (2008), “Observations in flat lapping of stainless steel and bronze”, International journal of Science and Technology of friction, lubrication and wear, Vol.265, 105-116.

Konig W and Klocke F (1996), Fertigungsverfahren 2 Schleifen, Honen, Läppen,” Machining Technologies, Grinding, Honing, Lapping, VDIVerlag, Düseldorf, Vol. 2.

Evans C.J and Paul E (2000) “Material Removal Mechanisms in Lapping and Polishing”, CIRP Annals Manufacturing Technology, Zygo Corporation, Middlefield, USA.

Chang Kuo-Yi, Song Yu-Hua and Lin Tsann-Rong (2002) “Analysis of Lapping and Polishing of a Gauge Block” International Journal of Advance Manufacturing Technology 20:414–419.

Deprez P, Hivart P, Coutouly J F, and Debarre E (2009) “Friction and Wear Studies Using Taguchi Method: Application to the characterization of carbon-silicon carbide tribological couples of automotive water pump seals,” Advances in Materials Science and Engineering, pp. 1-10.

Mahmoudshewakh Walid (2012) “Comparison between Grinding and Lapping of machined part surface roughness in micro and nano scale”, Journal of Mechanical Engineering and Technology.

Molenda Justyna (2016) “Surface quality control of Al2O3 specimens after lapping”, Journal of KONES Powertrain and Transport, Vol. 23.

https://www.gmt.co.in/archive/news-history-lapping.htm

https://lappingmachinesindia.in/Lapping_Machines.html

https://powersolutions.danfoss.com/products/piston-pumps-and- motors

https://www.apriori.com/products/technology/virtual- production-environments/

Downloads

Published

2018-03-01

How to Cite

[1]
Pankaj Singh Routela, Navdeep Malhotra, and Ashok Kaliyaperumal, “LAPPING COST MODEL: AN EFFECTIVE TOOL TO CALCULATE FINISHING PROCESS COST”, JME, vol. 13, no. 1, pp. 035–041, Mar. 2018.

Issue

Section

Articles