OPTIMIZATION ON FRICTION WELDING OF ALUMINIUM ALLOY 6082 T6 USING RESPONSE SURFACE METHOD

Authors

  • Krishnakumar Dept. of Metallurgical Engg, Government college of engineering ,salem- 11, Tamilnadu, India
  • Deepak Kumar M Dept. of Metallurgical Engg, Government college of engineering ,salem- 11, Tamilnadu, India
  • Venkatakrishnan P G Dept. of Metallurgical Engg, Government college of engineering ,salem- 11, Tamilnadu, India

Keywords:

Friction Welding, Aluminium Alloy, Optimization

Abstract

Welding of similar metals with the use of solid state welding has a great demand in many applications. In this study, tensile strength of the friction welding of Aluminium alloy 6082 T6 has been investigated. Various experiments are conducted using design of experiments. The effect of parameter over tensile strength has been analyzed. The composition of weld joint and fracture surface of tensile tested sample were analyzed by using Scanning Electron Microscope which reveals that the increase in friction pressure and forging pressure, the tensile strength has increased.

Downloads

Download data is not yet available.

References

Ashfaq M, Nagarjuna Sajja, Khalid Rafi H and Prasad Rao K (2013), “Improving Strength of Stainless Steel/Aluminum Alloy Friction Welds by Modifying Faying Surface Design”, Vol. 22 (2), 376-383.

Uday M, Basheer and Ahmad-Fauzi Mohd Noor(2010), “Microstructural Development in Friction Welded Aluminum Alloy with Different Alumina Specimen Geometries”,

Shailesh K Singh, Kamanio Chattopadhyay and Pradip Dutta (2012), “Friction Welding of Thixocast A356 Aluminium Alloy”.

Xiong J T, Li J L, Wei Y N, Zhang F S and Huang W D (2013), “An analytical model of steady-state continuous drive friction welding”, Vol. 61 (5), 1662–1675.

Ambroziak A et. al. (2007), “Friction welding of dissimilar metal

joints with intermediate layers”, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 21 (2), 37-40.

Isshiki Y et. al. (2008), “Prediction Method of Transient Temperature Distribution in Friction Welding of Two Similar Materials of Steel”, The International Society of Offshore and Polar Engineers (ISOPE) Conference, 261-267, Vancouver, BC, Canada.

Kusçu H et. al. (2007), “Experimental Determination of Temperature by the Friction Welding Method”, Baltic Heat. Presented at the Baltic Heat Transfer Conference, St. Petersburg, Russia.

Kimura M et. al. (2010), “Analysis Method of Friction Torque and Weld Interface Temperature during Friction Process of Steel Friction Welding”. Journal of Solid Mechanics and Materials Engineering, Vol. 4, 3.

Rombault P (2011), “Joining of Dissimilar Materials Through Rotary Friction Welding”, Thesis (Master in Engineering: Electromechanical Engineering). Department Mechanical Construction and Production Faculty of Engineering, Ghent University, Belgium.

Khan I A (2011), “Experimental and Numerical Investigation on the Friction Welding Process”, Thesis (Doctor of Philosophy in Faculty of Mechanical Engineering). Research and Development Cell Technological University Hyderabad Kukatpally, Hiderabad, India.

Downloads

Published

2014-06-01

Issue

Section

Articles

How to Cite

[1]
“OPTIMIZATION ON FRICTION WELDING OF ALUMINIUM ALLOY 6082 T6 USING RESPONSE SURFACE METHOD”, JME, vol. 9, no. 2, pp. 124–127, Jun. 2014, Accessed: Dec. 07, 2024. [Online]. Available: https://smenec.org/index.php/1/article/view/281

Similar Articles

11-20 of 290

You may also start an advanced similarity search for this article.