PERFORMANCE EVALUATION OF SOLAR AIR HEATER USING INCLINE BAFFLES

Authors

  • Karthik S PG Scholar, Department of Mechanical Engineering, National Engineering College, Kovilpatii
  • Gokul S UG Scholar, Department of Mechanical Engineering, National Engineering College, K.R. Nagar, Kovilpatti-628 503,Tamil Nadu,India

DOI:

https://doi.org/10.37255/jme.v17i1pp025-034

Abstract

To investigate the solar air heater’s (SAH) effectiveness, experiments are conducted using flat plates and artificially roughened plate in terms of Inclined and Winglet baffles over the collector surface. This proposed system collector plate comprises Inclined and Winglet ribs and serves as an artificial roughness generator. Airflow rates of 0.01, 0.02, & 0.03kg/s are used in the experiment. To determine the improvement in the proposed work, the experimental results are compared with flat plate SAH. This proposed work offers greater efficiency, useful energy gain, and lower top heat loss than a conventional SAH. The airflow rate of 0.03kg/s gives the topmost efficiency and useful energy gain. The experimental day’s average efficiency of a SAH with Incline baffles is 32.6 %, 53.6 %, and 61.9 %, respectively, for the flow rates examined. For the same flow rates, it is 37.4 %, 29.6 %, and 24.39 % more effective than a flat surface SAH. For the same investigated air flow rates, the proposed system gains 37.7 %, 27.63 %, and 23.63 % more energy than flat plate SAH. Substantial reductions in Top losses of up to 8.20 %, 6.55 %, & 7.65 % have been reported at the specified flow rates. Energy metrics and economic study performed shows the payback time, Production factor, Life cycle conversion efficiency and economic values of the proposed SAH is optimum.

Downloads

Download data is not yet available.

References

Abo-Elfadl S, Hassan H, El-Dosoky MF (2020) Study of the performance of double pass solar air heater of a new designed absorber: An experimental work. Sol Energy 198:479–489. https://doi.org/10.1016/j.solener.2020.01.091

Abuşka M (2018) Energy and exergy analysis of solar air heater having new design absorber plate with conical surface. Appl Therm Eng 131:115–124. https://doi.org/10.1016/j.applthermaleng.2017.11.129

Azadani LN, Gharouni N (2021) Multi objective optimization of cylindrical shape roughness parameters in a solar air heater. Renew Energy 179:1156–1168. https://doi.org/10.1016/j.renene.2021.07.084

Bansal G, Kishore C, Dogra V, et al (2019) Impact of relative roughness height on the materialistic thermohydraulic performance of the multiple V-ribbed solar air heater. Mater Today Proc 26:1845–1849. https://doi.org/10.1016/j.matpr.2020.02.405

Gabhane MG, Kanase-Patil AB (2017) Experimental analysis of double flow solar air heater with multiple C shape roughness. Sol Energy 155:1411–1416. https://doi.org/10.1016/j.solener.2017.07.038

Gill RS, Hans VS, Singh RP (2021) Optimization of artificial roughness parameters in a solar air heater duct roughened with hybrid ribs. Appl Therm Eng 191:116871. https://doi.org/10.1016/j.applthermaleng.2021.116871

Goel V, Kumar R, Bhattacharyya S, et al (2021) A comprehensive parametric investigation of hemispherical cavities on thermal performance and flow-dynamics in the triangular-duct solar-assisted air-heater. Renew Energy 173:896–912. https://doi.org/10.1016/j.renene.2021.04.006

Hegazy MM, El-Sebaii A, Ramadan MR, et al (2020) Comparative study of three different designs of a hybrid PV/T double-pass finned plate solar air heater. Environ Sci Pollut Res 27:32270–32282. https://doi.org/10.1007/s11356-019-07487-8

Kumar A, Behura AK, Saboor S, Gupta HK (2020) Comparative study on W-shaped roughened solar air heaters by using booster mirror. Mater Today Proc 46:5675–5680. https://doi.org/10.1016/j.matpr.2020.09.734

Kumar A, Saini RP, Saini JS (2013) Development of correlations for Nusselt number and friction factor for solar air heater with roughened duct having multi v-shaped with gap rib as artificial roughness. Renew Energy 58:151–163. https://doi.org/10.1016/j.renene.2013.03.013

Kumar K, Prajapati DR, Samir S (2016) Heat Transfer and Friction Factor Correlations Development for Solar Air Heater Duct. Exp Therm Fluid Sci. https://doi.org/10.1016/j.expthermflusci.2016.11.012

Kumar R, Goel V, Singh P, et al (2019) Performance evaluation and optimization of solar assisted air heater with discrete multiple arc shaped ribs. J Energy Storage 26:100978. https://doi.org/10.1016/j.est.2019.100978

Mahanand Y, Senapati JR (2021) Thermo-hydraulic performance analysis of a solar air heater (SAH) with quarter-circular ribs on the absorber plate: A comparative study. Int J Therm Sci 161:106747. https://doi.org/10.1016/j.ijthermalsci.2020.106747

Murali G, Sundari ATM, Raviteja S, et al (2020) Experimental study of thermal performance of solar aluminium cane air heater with and without fins. Mater Today Proc 21:223–230. https://doi.org/10.1016/j.matpr.2019.04.224

Pandey NK, Bajpai VK, Varun (2016) Experimental investigation of heat transfer augmentation using multiple arcs with gap on absorber plate of solar air heater. Sol Energy 134:314–326. https://doi.org/10.1016/j.solener.2016.05.007

Patel SS, Lanjewar A (2021a) Heat transfer enhancement using additional gap in symmetrical element of V-geometry roughened solar air heater. J Energy Storage 38:102545. https://doi.org/10.1016/j.est.2021.102545

Patel SS, Lanjewar A (2021b) Experimental investigation of solar air heater duct with discrete V-rib integrated with staggered elements. Int J Sustain Eng 14:162–171. https://doi.org/10.1080/19397038.2020.1737752

Rajendran V, Ramasubbu H, Alagar K, Ramalingam VK (2021) Performance analysis of domestic solar air heating system using V-shaped baffles – An experimental study. Proc Inst Mech Eng Part E J Process Mech Eng 1–13. https://doi.org/10.1177/09544089211016256

Rajendran V, Ramasubbu H, Rajarathinam JV, Pichandi R (2022) Experimental study on the thermal performance of a solar air heater integrated with multi-geometry arrangements over the absorber plate. Environ Sci Pollut Res. https://doi.org/10.1007/s11356-022-18830-x

Saravanan A, Murugan M, Reddy MS, et al (2021) Thermo-hydraulic performance of a solar air heater with staggered C-shape finned absorber plate. Int J Therm Sci 168:107068. https://doi.org/10.1016/j.ijthermalsci.2021.107068

Singh S, Singh A, Chander S (2019) Thermal performance of a fully developed serpentine wavy channel solar air heater. J Energy Storage 25:100896. https://doi.org/10.1016/j.est.2019.100896

Sivakandhan C, Arjunan T V, Matheswaran MM (2020) Thermohydraulic performance enhancement of a new hybrid duct solar air heater with inclined rib roughness. Renew Energy147:2345–2357. https://doi.org/10.1016/j.renene.2019.10.007

sSureandhar G, Srinivasan G, Muthukumar P, Senthilmurugan S (2021) Performance analysis of arc rib fin embedded in a solar air heater. Therm Sci Eng Prog 23:100891. https://doi.org/10.1016/j.tsep.2021.100891

Downloads

Published

2022-03-01

Issue

Section

Articles

How to Cite

[1]
“PERFORMANCE EVALUATION OF SOLAR AIR HEATER USING INCLINE BAFFLES”, JME, vol. 17, no. 1, pp. 025–034, Mar. 2022, doi: 10.37255/jme.v17i1pp025-034.