WEAR AND THERMAL BEHAVIOR OF GRAPHITE PARTICLE REINFORCEMENT IN ZA-27 ALLOY COMPOSITES FOR TRIBOLOGICAL APPLICATIONS

Authors

  • Prakash K R Department of Mechanical Engineering, East Point College of Engineering and Technology, Bangalore, Karnataka – 560 049, India.
  • Girish B M Department of Mechanical Engineering, MVJ College of Engineering, Bangalore, Karnataka – 560 067, India
  • Satish B M Department of Mechanical Engineering, East Point College of Engineering and Technology, Bangalore, Karnataka – 560 049, India.
  • Jain P K International Advanced Research Centre for Powder Metallurgy and New Materials, Hyderabad – 500 005 India

Keywords:

Metal Matrix Composites, Wear, Microstructure

Abstract

The objective of present work is to investigate the effect of macroscopic graphite particles on Wear and thermal behavior of ZA-27 alloy composites. Compo casting technique was used to prepare the composites, in which the graphite particles were used to reinforce ZA-27 alloy .Wear tests were conducted using pin on disc sliding wear testing apparatus under unlubricated conditions at various load and speeds, results indicates  that the tribological properties improves with the addition of graphite particle

Downloads

Download data is not yet available.

References

Bragg W L (1928), “Introduction to Crystal Analysis”. Bell and son, London, 64-70.

Schaller R (2003), “Metal Matrix Composites A Smart Choice for High Damping Materials”, J. Alloys Compd., Vol. 355,131-135.

Smith W (1993), “Structures and Properties of Engineering Alloys”, McGraw Hill, New York, 2nd edition, 561-566.

Alan Wolfenden and Vikram Kinra K (1997), “M3D III: Mechanics and Mechanisms of Material Damping”, ASTM Publications, 130,148,156.

Zhang J M, Perez R J, Wong C R and Lavernia E J(1994)“Effects of Secondary Phases on the Damping Behavior of Metals, Alloys and Metal-Matrix Composites”, Mater. Sci. Eng. Vol. 13, 325-389.

James D W (1969), “High Damping Metals for Engineering Applications”, Mater. Sci. Eng., Vol. 4, 1-8

Zhang J, Perez R J, Lavernia E J(1993), “Documentation of Damping Capacity of Metallic, Ceramic and Metal-Matrix Composite-Materials”. J. Mater. Sci. Vol. 28, 2395-2404.

Lavernia E J, Perez R J, Zhang J (1995), “Damping Behavior of Discontinuously Reinforced Al-Alloy Metal-Matrix Composites”, Metall. Mater. Trans. A, Vol.26, 2803-2818.

Liu Y B, Lim S C, Ray S and Rohatgi P K (1992), “Friction and Wear of Aluminium-Graphite Composites”, Wear, Vol.159, 201-205.

Pai B C, Rohatgi P K and Venkatesh S V (1974), “Wear Resistance of Cast Graphite Aluminium Alloys, Wear,Vol. 30,117-122.

Seah K H W, Sharma S C, Garish B M and Lima S C (1995), “Wear Characteristics of as-cast ZA-27/Graphite Particulate Composites”. Materials and Design Vol.16, 337-341

Downloads

Published

2011-06-01

Issue

Section

Articles

How to Cite

[1]
“WEAR AND THERMAL BEHAVIOR OF GRAPHITE PARTICLE REINFORCEMENT IN ZA-27 ALLOY COMPOSITES FOR TRIBOLOGICAL APPLICATIONS”, JME, vol. 6, no. 2, pp. 069–074, Jun. 2011, Accessed: Oct. 16, 2024. [Online]. Available: https://smenec.org/index.php/1/article/view/421

Similar Articles

21-30 of 312

You may also start an advanced similarity search for this article.