Investigations on Mechanical Properties of Nano Particulates (Al2O3/B4C) Reinforced in Aluminium 7075 Matrix Composite

Authors

  • Chandru J Department of Mechanical Engineering, Murugappa Polytechnic College, Avadi, Tamil Nadu-600 062, India
  • Vishnu Sudarsan P Department of Mechanical Engineering, Murugappa Polytechnic College, Avadi, Tamil Nadu-600 062, India

DOI:

https://doi.org/10.37255/jme.v19i3pp077-081

Keywords:

Al7075, Ultrasonic Cavitation, Scanning Electron Microscope (SEM).Nano composite, reinforce particulates, metal matrix composite

Abstract

Metal Matrix Nano Composites (MMNCs) with the addition of nano-particulate reinforcements can be of significance for automobile, aerospace, and numerous applications due to their low density and good mechanical properties, better corrosion and wear resistance, low coefficient of thermal expansion as compared to conventional materials. Designing the metal matrix composite material aims to combine the desirable attributes of metals and ceramics. The present work is focused on studying the mechanical properties of aluminium alloy (7075) with Al2O3 and B4C nanocomposite produced using the stir casting technique and ultrasonic cavitation method. Different % age of reinforcement is used. An ultrasonic cavitation technique is used to achieve a uniform dispersion of nano-particulate Al2O3 and B4C in molten aluminium alloy. Tensile, Hardness, and Impact tests were performed on the samples obtained by the fabrication processes. A structural study will be carried out through a Scanning Electron Microscope (SEM) to know the distribution of Al2O3/B4C Nano particulates in Al alloy.

Downloads

Download data is not yet available.

References

1. Umanath K., S. Selvamani, K. Palanikumar, and V. J. Parameswaran, "Dry sliding behavior of AA6061-T6 reinforced SiC and Al2O3 particulate hybrid composites," “Procedia Engineering”, vol. 97, pp. 694–702, 2014.

2. H. R. Md. and M. R. M. Sayuti, "Characterization of SiC reinforced aluminium matrix composites," “Procedia Engineering”, vol. 90, pp. 33–39, 2014.

3. J. Jiang, J. Yang, J. Bai, Y. Zhang, X. Wang, and Y. Zhang, "Microstructure and mechanical properties of the rheoformed cylindrical part of 7075 aluminium matrix composite reinforced with nano-sized SiC particles," “Materials and Design”, vol. 79, pp. 32–41, 2015.

4. J. J. S. and T. K. Chandrashekar, "Hybrid metal matrix composite reinforced with SiC and TiB2," “Procedia Engineering”, vol. 97, pp. 1018–1026, 2014.

5. D. K. Koli, G. Agnihotri, and R. Purohit, "A review on properties, behaviour and processing methods for Al-nano Al2O3 composites," “Procedia Materials Science”, vol. 6, pp. 567–589, 2014.

6. A. V. S. and N. B. Bhajantri, "Processing of B4C particulate reinforced 6061 AMCs by melt stirring involving two-step addition," “Materials Science”, vol. 6, pp. 1068–1076, 2014.

7. M. M., R. R. Pillai, and P. K. Jha, "Preparation and characterization of B4C particulate reinforced Al-Mg alloy matrix composites," “International Journal of Modern Engineering Research (IJMER)”, vol. 3, no. 6, pp. 3723–3729, Nov.–Dec. 2013.

8. P. Sharma, D. Kumar, and M. Ramachandran, "Production and some properties of Si3N4 reinforced aluminium alloy composites," “Journal of Asian Ceramic Societies”, vol. 3, no. 3, pp. 305–311, 2015.

9. M. J. Shen, Y. Ma, S. Huang, and M. Q. Zhao, "Processing, microstructure and mechanical properties of bimodal size SiCp reinforced AZ31B magnesium matrix composites," “Journal of Magnesium and Alloys”, vol. 3, pp. 162–167, 2015.

10. R. G. L., P. K. M., S. Basavarajappa, and J. T. F., "Processing and evaluation of dry sliding behaviour of SiC reinforced AMCs," “Procedia Materials Science”, vol. 5, pp. 289–294, 2014.

11. D. Tabor, “The Hardness of Metals”, Oxford, U.K.: Oxford University Press, 1951.

12. J. R. Davis, “Aluminium and Its Alloys”, 1st ed. Washington, D.C.: The Aluminium Association, Inc., 2001.

13. N. Chawla and K. K. Chawla, "Tensile and fatigue fracture of discontinuously reinforced aluminium composites," in “Advances in Fracture Research”, 1st ed., New York: Pergamon, 2001, pp. 1–6.

Downloads

Published

2024-09-01

How to Cite

[1]
“Investigations on Mechanical Properties of Nano Particulates (Al2O3/B4C) Reinforced in Aluminium 7075 Matrix Composite”, JME, vol. 19, no. 3, pp. 077–081, Sep. 2024, doi: 10.37255/jme.v19i3pp077-081.

Similar Articles

11-20 of 296

You may also start an advanced similarity search for this article.