Evaluation and Mechanical Properties of Plasma Arc Welded IS2062 Steel Tube Joints

Authors

  • Prabu S Department of Mechanical Engineering, Government Polytechnic College, Thuvakudi malai, Trichy, Tamil Nadu- 620022, India
  • Subravel V Department of Mechanical Engineering, Government College of Engineering, Thanjavur, Tamil Nadu- 613402, India

DOI:

https://doi.org/10.37255/jme.v15i3pp72-75

Keywords:

IS 2062, Plasma Arc welding, Hardness

Abstract

In th present work, an attempt has been made to study the effect of plasma arc welding on fusion characteristics of IS 2062 joints. Joints were fabricated using different levels of welding current (140 Amp –160 Amp). The formation of the amount of ferrite in the weld metal controls the microstructural evolution during high-temperature service and higher hardness in the fusion zone, which is due to martensitic formation in the weld zone. 

Downloads

Download data is not yet available.

References

Joseph C, Chen, Ye Li (2009), Taguchi Based Six Sigma Approach to Optimise Plasma Arc Cutting Process: an Industrial Case Study, International Journal of Advanced Manufacturing Technology, 41:760-769.

Asiabanpour Bahram (2009), Optimising the automated plasma cutting process by design of experiments, Int. Journal Rapid Manufacturing, 1:19 – 40.

Katsunori Inoue and De-Fu He,(1984), Penetartion–Self-Asaptive Free Frequency Pulsed Plasma Arc Welding Process Controlled with Photocell Sensor, Transactions of JWRI, Vol. 13:7-11.

T. S. Baker, (1985), Fatigue crack propagation and fracture toughness of plasma arc welded Ti-6AL-4V alloy, Royal aircraft establishment, Technical report no: 85066.

Hatala Michal “Faculty of Manufacturing Technologies of the Technical University of Košice Štúrova The Principle of Plasma Cutting Technology and Six Fold Plasma Cutting”, 5 th International Multidisciplinary Conference.

Downloads

Published

2020-09-01
CITATION
DOI: 10.37255/jme.v15i3pp72-75
Published: 2020-09-01

How to Cite

[1]
P. . S and S. . V, “Evaluation and Mechanical Properties of Plasma Arc Welded IS2062 Steel Tube Joints ”, JME, vol. 15, no. 3, pp. 072–075, Sep. 2020.