INVESTIGATION OF A STRESS CONCENTRATION FACTOR FOR A PLATE WITH DIFFERENT PATTERN OF HOLES- FINITE ELEMENT APPROACH
Keywords:
FEM, stress concentration factor, ANSYS, Hole at corner, holes at a far distanceAbstract
Three cases-horizontal hole pair in uniaxial loading, hole at the corner and holes at large distance to each other subjected to uniaxial loading are studied in the current work by analytical, experimental and by finite element method(FEM). Results clearly indicate that the finite element approach has yielded fairly encouraging results. This plainly shows FEM can be utilized as a critical apparatus to comprehend the conduct of plates subjected to differed holepatterns subjected to uniaxialloading condition. The current work implies the reliable results given by FEM and also compares the results with the standard experimental data as well as theoretical calculations.
Downloads
References
Patle B C and Bhope D V (2012), “Evaluation of Stress Concentration Factors In Plate with Oblique Hole”, Journal of Mechanical and Civil Engineering, Vol. 2 (2), 28-32.
Chaudhuri R A (1987), “Stress concentration around a part through hole weakening laminated plate,” Computers & Structures, Vol. 27(5), 601-609.
Chen H C (1993), “Special finite element including stress concentration effects of a hole”, Journal of Finite Element Analysis and Design, Vol. 13, 249–258.
Piltner R (1985), “Special finite elements with holes and internal cracks”, International Journal for Numerical Methods in Engineering, Vol. 21, 1471–1485.
Muskhelishvili N I (1963), “Some Basic Problem of Mathematical Theory of Elasticity”, Noordhoof Ltd., The Netherland.
Savin G N (1961), “Stress Distribution around Holes”, Pregamon Press, NewYork.
Lekhnitskii S G (1968), “Anisotropic Plate”, Gordon and Breach Science Publishers, NewYork.
Rao D K N Babu M R Reddy K R N and Sunil D (2010), “Stress around square and rectangular cutouts in symmetric laminates”, Compos.,Struct.,28452859.doi:10.1016/j.compstruct.2010.04.01.
Sharma D S (2015), “Stresses around polygonal hole in an infinite laminated composite plate”, Eur. J. Mech. - A/Solids., Vol. 54, 44–52. doi:10.1016/j.euromechsol.2015.06.004.
Sharma D S (2014), “Moment distribution around polygonal holes in infinite plate”, Int. J.Mech. Sci., Vol. 78, 177–182. doi:10.1016/j.ijmecsci.2013.10.021.
Sharma D S (2012), “Stress distribution around polygonal holes”,Int.J.Mech.Sci.65(2012)11524.doi:10.1016/j.ijmecsci.2013.10.021.
Batista M (2011), “On the stress concentration around a hole in an infinite plate subject to a uniform load at infinity”, Int. J. Mech.Sci.53(2011) 254–261.doi:10.1016/j.ijmecsci.2011.01.006.
Rezaeepazhand J and Jafari M (2010), “Stress concentration in metallic plates with special shaped cutout”, Int. J. Mech. Sci.52(2010)96–02.doi:10.1016/j.ijmecsci.2009.10.013.
Rezaeepazhand J and Jafari M (2008), “Stress analysis of perforated composite plates with non circular cutout”, Key Eng. Mater, 4365–368.
Rezaeepazhand J and Jafari M (2005), “Stress analysis of perforated composite plates”, Compos. Struct.,Vol. 71, 463–468. doi:10.1016/j.compstruct.2005.09.017.
Daoust J and Hoa S V (1991), “An analytical solution for anisotropic plates containing triangular holes”, Compos. Struct., Vol. 19, 107–130.
Anubhavtewari Shital M and patil (2016), “Analysis of a stress concentration factor for a plate with varying loading conditions- finite element approach”, Advanced Materials Manufacturing & Characterization, Vol. 6(2).
Iwaki T (1980), “Stress concentrations in a plate with two unequal circular holes,” International Journal of Engineering Sciences, Vol. 18(8), 1077-1090.
Ukadgaonker V G and Rao D K N (2000), “A general solution for stress around holes in symmetric laminates under in-plane loading,” Composite Structure, Vol. 49, 339-354.
Pilkey and Walter D (1999), “Peterson's Stress Concentration Factors”, Wiley, 2nd Ed.
Pilkey D and Deborah F “Pilkey Google book- Peterson's stress concentration factors By Walter”.
Durelli A J Parks V J and Lopardo VJ (1970), “stresses and finite strains around an elliptic hole in finite plates subjected to uniform load”, International Journal of Nonlinear Mechanics, Vol. 5, 397–411.
