EXPERIMENTAL INVESTIGATIONS ON THE IMC IN FRICTION STIR WELDED AA7075 ALUMINUM JOINTS WITH COPPER INSERTS
Keywords:
FSW, AA7075, Copper Insert, IMC, Mechanical properties, Macrostructures , SEMAbstract
Friction Stir Welding (FSW) is an innovative and promising solid state joining process invented by The Welding Institute (TWI). FSW can arguably be said to represent one of the most significant developments in metal joining technology over the last two decades. The intense plastic deformations and temperature fluctuations generated by the rotating and traversing tool in FSW have a significant impact on the micro structural modifications in the weld zone and thereby on the mechanical properties of the welded joint. Experiments were conducted on 6 mm thick AA7075, commercially available aluminum plates, widely used in structural fabrication of critical components in aerospace, defence and military applications, where the weld strength is expected to be very near to the parent metal strength. The plates were joined by FSW on both sides, with and without a thin layer of copper insert in-between the two aluminium plates. Mechanical and metallurgical characterization of the welded joints shows superior strength in copper inserted joints as compared to the joints without intermediate copper layer. Influence of the newly formed Inter Metallic Compound (IMC) with copper particles dispersed in a solid solution of aluminium matrix enhances the joint strength. High hardness with fine grains of the IMC in weld nugget improves the tensile strength of the joint.
Downloads
References
Thomas WM, Nicholas ED, Needham JC, Church MG, Templesmith P and Dawes CJ (1991), “Friction Stir Welding” International Patent Application No. PCT/GB92102203 and Great Britain Application No. 9125978.8.
Thomas W M and Nicholas E D (1997), “Friction Stir Welding for the Transportation Industries”, Materials Design, Vol. 18 (4-6), 269 -273.
Mandal N R (2005), “Aluminium Welding”, Narosa Publishing House, Second Edition, 149-161.
Cavaliere P, Nobile R, Panella F W and Squillace A (2006), “Mechanical and Microstructural Behaviour of 2024 – 7075 Aluminium Alloy Sheets Joined by Friction Stir Welding”, International Journal of Machine Tools and Manufacture, Vol. 46(6), 588 – 594.
Cavaliere P, Cabibbo M, Nobile R, Panella F W and Squillace A (2009), “2198 Al – Li plates joined by Friction Stir Welding: Mechanical and Microstructural Behaviour”, International Journal of Materials and Design, Vol.30, 3622 – 3631.
Yingchun Chen, Huijie Liu and Jicai Feng (2006), “Friction Stir Welding Characteristics of Different Heat Treated State 2219 Aluminium Alloy Plates”, International Journal of Material Science and Engineering, Vol. A 420, 21 – 25.
Tanaka T, Morishige T and Hirata T (2009), “Comprehensive Analysis of Joint Strength for Dissimilar Friction Stir Welds of Mild Steel to Aluminium Alloys”, Scripta Materialia, Vol. 61(7), 756-759.
Weifeng Xa, Jinhe Liu, Guohong Luan and Chunlin Dong (2009), “Microstructure and Mechanical Properties of Friction Stir Welded Joints in 2219 – T6 Aluminium Alloy” International Journal of Materials and Design, Vol. 30, 3460 – 3467.
Kostka A, Coelho R S, Dos Santos J and Pyzalla A R (2009), “Microstructure of Friction Stir Welding of Aluminium Alloy to Magnesium Alloy”, Scripta Materialia, Vol. 60(11), 953 – 956.
Madhusudhan Reddy G, Mastanaiah P, Murthy C V S, Mohandas T and Viswanathan N (2006), “Microstructure, Residual Stress Distribution and Mechanical Properties of Friction Stir AA6061Aluminium Alloy Weldments”, Proceedings of the Seminar on NDE, Hyderabad, 186 -197.
Hassan Kh A A, Prangnell P B, Norman A F, Price D A and Williams S W, 2003, “Effect of Welding Parameters on Nugget Zone Microstructure and Properties in High Strength Aluminum Alloy Friction Stir Welds”, Science and Technology of Welding and Joining, Vol. 8(40), 257-268.
Thomas W, Nicholas D, Staines D, Tubby P J, and Gittos M F (2004), “FSW Process Variants and Mechanical Properties”, Pre-IIW Meeting on FSW, Nagoya University, Japan.
Boz M and Kurt A (2004), “The Influence of Stirrer Geometry on Bonding and Mechanical Properties in Friction Stir Welding Process”, Materials and Design, Vol. 25, 343-347.
Colegrove P A and Shercliff H R (2003), “Experimental and Numerical Analysis of Aluminum Alloy 7075-T7351 Friction Stir Welds”, Science and Technology of Welding and Joining, Vol. 8(5), 360-368.
Colligan K.J, Xu J, and. Pickens J R, TMS (2003), “Welding Tool and Process Parameter Effects in Friction Stir Welding of Aluminum Alloys”, Friction Stir Welding and Processing II, 181-190.
Prasad Reddy G V, Sandya R, Vasan M, Bhanu Sankara Rao K and Prasad R.C (2007), “Fatigue Behaviour of 316 (N)/316(N) Weld Joints and 316(N) Welds”, Journal of Manufacturing Engineering, Vol.2(2), 122-130.
Ratnakumar K, Madhusudana Reddy G and Srinivasa Rao K, (2010), “Pitting Corrosion of Friction Stir Welded A356 Al-Si Alloy-Effect of Rotational Speed of Tool”, Journal of Manufacturing Engineering Vol. 5(2), 99-105.
Properties and Selection, Non Ferrous Alloys and Special Purpose Materials, ASM Handbook, The materials information society, Vol. 2, 550 – 560.
