PREDICTION OF WELD BEAD WIDTH IN SUBMERGED ARC WELD OF MILD STEEL USING FUZZY LOGIC MODELING

Authors

  • Edwin Raja Dhas J Department of Production Engineering, National Institute of Technology Tiruchirappalli, Tamilnadu, India. https://orcid.org/0000-0001-8645-0384
  • Kumanan S Department of Production Engineering, National Institute of Technology Tiruchirappalli, Tamilnadu, India.

Keywords:

Fuzzy Logic, Weld Quality, Submerged Arc Welding

Abstract

Artificial Intelligent tools such as expert systems, artificial neural network, and fuzzy logic support decision-making in intelligent manufacturing systems. Success of intelligent manufacturing systems depends on effective and efficient utilization of intelligent tools. This paper discusses the development of a fuzzy logic model to predict weld quality for Submerged Arc Welding process (SAW) under given set of input weld parameters such as welding current, arc voltage, welding speed, and electrode stickout. The model is developed using Matlab toolbox functions and is validated.

Downloads

Download data is not yet available.

References

Apps R L, Gourd L M and Lelson K A (1963), “Effect of Welding Variables Upon Bead Shape and Size in Submerged-Arc Welding”, Weld Metal Fabrication, Vol. 31, pp 453–457.

Gupta V K and Parmar R S (1986), “Fractional Factorial Techniques to Predict Dimensions of the Weld Bead in Automatic Submerged Arc Welding”, Journal of Institution of Engineers (India), Vol. 70, pp 67–71.

Revaandra J and Parmar R S (1987), “Mathematical Model to Predict Weld Bead Geometry for Flux Cored Welding”, Metal Construct, Vol. 19, pp 31R – 35R.

Yang L J and Chandel R S (1993), “An Analysis of Curvilinear Regression Equations for Modeling the Submerged-Arc Welding Process”, Journal of Material Processing Technology, Vol. 37, pp 601-611.

Kim I S, Kwon W H, and Park C E (1996), “The Effects of Welding Process Parameters on Weld Bead Width in GMAW Processes”, The Korea Weld Soc, Vol. 14, pp 204-213.

Tarng Y S and Yang W H (1998),”Optimization of the Weld Bead Geometry in Gas Tungsten Arc Welding By The Taguchi Method”, International Journal of Advanced Manufacturing. Technology, Vol. 14, pp 549–554.

LeeJ L and Rhee S (2000),”Prediction of Process Parameters for Gas Metal Arc Welding By Multiple Regression Analysis”, Proceedings of the Institution of Mechanical Engineers – B, Vol. 214 (B6), pp 443-449.

Mohamad H H (2002), ‘Fundamentals of Artificial Neural Networks’, Prentice Hall of India, Delhi.

Jeongick Lee and Kiwoan Um (2000),”A Comparison in a Back-Bead Prediction of Gas Metal Arc Welding Using Multiple Regression Analysis and Artificial Neural Network”, Optics and Lasers in Engineering, Vol. 34, pp 149-158.

Yang L J, Bibby M J and Chandel R S (2003), “Linear Regression Equations for Modeling the Submerged-Arc Welding Process”, Journal of Material Processing Technology, Vol. 39, pp 33-42.

Nagesh D S and Datta G L (2002), “Prediction of Weld Bead Geometry and Penetration in Shielded Metal-Arc Welding using Artificial Neural Networks”, Journal of Materials Processing Technology, Vol. 123, pp 303–312.

Kim I S, Son J S, Park C E, Lee C W and Yarlagadda Prasad K D V (2002), “A Study on Prediction of Bead Height in Robotic Arc Welding using a Neural Network”, Journal of Materials Processing Technology, Vol. 131 , pp 229–234.

Ridings G E, Thomson R C, and Thewl G (2002), “Prediction of Multiwire Submerged Arc Weld Bead Shape using Neural Network Modeling”, Science and Technology of Welding and Joining, Vol. 7, pp 265-279.

Wu C S, Gao J Q and Zhao Y H (2006), “A Neural Network for Weld Penetration Control in Gas Tungsten Arc Welding”, Acta Metallurgica Sinica, (Engl. Lett.) Vol. 19, pp 27-33.

Hakan Ates (2007), “Prediction of Gas Metal Arc Welding Parameters based on Artificial Neural Networks”, Materials and Design, Vol. 28, pp 2015-2023.

Edwin Raja Dhas J and Kumanan S (2007), “Prediction of Weld Bead Width using Artificial Neural Networks”, Proceeding of the National Conference on Factory Automation, Robotics and Soft Computing, NIT., Warangal, Jan 2007, pp 382-385.

Zadeh L A (1965), “Fuzzy Sets”, Information and Control, Vol.8 (3), pp 338-353.

Yen J and Langari R (2003), “Fuzzy Logic Intelligence Control and Information”, Pearson Education, Delhi.

Boo K S and Cho H S (1994), “A Self-Organizing Fuzzy Control of Weld Pool Size in GMA Welding Processes”, Control Engineering Practice, Vol. 2, pp 1007-1018.

Rajurkar K P and Wang W M (1997), “Improvement of EDM Performance with Advanced Monitoring and Control Systems”, ASME - Journal of Manufacturing Science and Engineering, Vol. 119, pp 770-775.

Tarng Y S, Yang W H and Juang S C (2000), “The Use of Fuzzy Logic in the Taguchi Method for the Optimization of the Submerged Arc Welding Process”, International Journal of Advanced Manufacturing Technology, Vol. 16, pp 688-694.

Yu Xue I S, Kim J S, Son C E, Park H H, Kim B S, Sung I J, Kim H J, Kim and Kang B Y (2005), “Fuzzy Regression Method for Prediction and Control the Bead Width in the Robotic Arc-Welding Process”, Journal of Material Processing Technology, Vol. 164-165, pp 1134-1139.

Downloads

Published

2009-09-01

How to Cite

[1]
“PREDICTION OF WELD BEAD WIDTH IN SUBMERGED ARC WELD OF MILD STEEL USING FUZZY LOGIC MODELING”, JME, vol. 4, no. 3, pp. 187–191, Sep. 2009, Accessed: Oct. 04, 2024. [Online]. Available: https://smenec.org/index.php/1/article/view/583

Similar Articles

1-10 of 197

You may also start an advanced similarity search for this article.