EXPERIMENTAL INVESTIGATION ON MECHANICAL AND THERMAL CHARACTERISTICS OF FIBER-POLYMER COMPOSITES

Authors

  • Valar Jothi P Department of Mechanical Engineering, NPR College of Engineering and Technology, Natham-624401, Tamilnadu, India.
  • Jayabal S Department of Mechanical Engineering, A.C.Government College of Engineering and Technology, Karaikudi-630003, Tamilnadu, India.
  • Kishore Kumar J Department of Mechanical Engineering, A.C.Government College of Engineering and Technology, Karaikudi-630003, Tamilnadu, India.
  • Sathiyamurthy S of Mechanical Engineering, Easwari Engineering College, Chennai - 600089, Tamilnadu, India.

Keywords:

Banana polymer composites, Polyester resin, Polypropylene, glass fiber, Rice Husk

Abstract

The demand for eco-friendly and lightweight materials in the automobile and structural sectors has focused the material experts to extend their research into the fields of natural fiber polymer composites. The present investigation is focused on the experimental investigation on mechanical and thermal characteristics of polymer composites. In this investigation, six different combinations of composites were selected for the evaluation of mechanical and thermal properties experimentally and their results were obtained. The better mechanical properties obtained in Banana- Rice Husk- Epoxy composites are comparable with Glass- Epoxy composites. The Banana- Rice Husk- Epoxy composites exhibited better values of tensile, flexural, impact and compressive strength of 39.7 MPa, 68.45 MPa, 40.8 kJ/m2 and 898.79 MPa respectively. Similarly the Glass-Epoxy composites exhibit the values of tensile, flexural, impact and compressive strength are 99.5 MPa, 150.49 MPa, 280.2 kJ/m2 and 3819.72 MPa respectively. Thus a hybrid particulate composite reveals the effective role played by rice husk in improving mechanical and thermal properties. Thus overall results revealed that hybrid natural fiber composites can be considered as a light weight material, and can produces better strength for the places where plastics are replaced.

Downloads

Download data is not yet available.

References

Agunsoye J O, Talabi S I, Awe O and Kelechi H (2013), ―Mechanical properties and tribological behavior of recycled polyethylene/cow bone particulate composite‖, Journal of Materials Science Research, Vol. 2 (2), 41-50.

Mallick P K (1993), ―Fibre Reinforced Composites-Materials, Manufacturing and Design‖, 2nd Ed, Marcel Dekker, Inc., 74.

Acharya S K, Mishra P and Mishra S C (2008), ―Effect of environment on the mechanical properties of fly ash -jute- polymer composites‖, Indian Journal of Engineering and Materials Sciences, Vol. 15, 483-488.

Agarwal, Gaurav, Amar Patnaik and Rajesh Kumar Sharma (2013), ―Thermo-mechanical properties of silicon carbide filled chopped glass fiber reinforced epoxy composites‖, International Journal of Advanced Structural Engineering, Vol. 5 (1), 1-8.

Agunsoye J O, Talabi S I, Awe O and Kelechi H (2013),

―Mechanical properties and tribological behavior of recycled polyethylene/cow bone particulate composite‖, Journal of Materials Science Research, Vol. 2 (2), 41-50.

Ajith Gopinath A, Kumar M S and Elayaperumal A (2014),

―Experimental Investigations on Mechanical Properties of Jute Fiber Reinforced Composites with Polyester and Epoxy Resin Matrices‖, Procedia Engineering, Vol. 97, 2052-2063.

Balaji N S and Jayabal S (2016), ―Artificial neural network modeling of mechanical behaviors of zea fiber–polyester composites‖, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol. 230 (1), 45-55.

Acharya S K, Mishra P and Mishra S C (2008), ―Effect of environment on the mechanical properties of fly ash -jute- polymer composites‖, Indian Journal of Engineering and Materials Sciences, Vol. 15, 483-488.

Agarwal, Gaurav, Amar Patnaik and Rajesh Kumar Sharma (2013), ―Thermo-mechanical properties of silicon carbide filled chopped glass fiber reinforced epoxy composites‖, International Journal of Advanced Structural Engineering, Vol. 5, (1), 1-8.

Xu, Peng, Yunhua Yu, Dawei Liu, Mei He, Gang Li, and Xiaoping Yang (2018), "Enhanced interfacial and mechanical properties of high-modulus carbon fiber composites: Establishing modulus intermediate layer between fiber and matrix based on tailored-modulus epoxy" Composites Science and Technology, Vol. 163, 26-33.

Sanjay M R, Madhu P, Mohammad Jawaid, Senthamaraikannan P, Senthil S and Pradeep S (2018), "Characterization and properties of natural fiber polymer composites: A comprehensive review", Journal of Cleaner Production, Vol. 172, 566-581.

Dayo, Abdul Qadeer, Bao-chang Gao, Jun Wang, Wen-bin Liu, Mehdi Derradji, Ahmer Hussain Shah, and Aijaz Ahmed Babar (2017), "Natural hemp fiber reinforced polybenzoxazine composites: Curing behavior, mechanical and thermal properties." Composites Science and Technology, Vol. 144, 114- 124.

Torres-Tello, Erika V, Jorge R Robledo-Ortíz, Yolanda González-García, Aida A Pérez-Fonseca, Carlos F Jasso- Gastinel and Eduardo Mendizábal (2017), "Effect of agave fiber content in the thermal and mechanical properties of green composites based on polyhydroxybutyrate or poly (hydroxybutyrate-co-hydroxyvalerate)" Industrial crops and products, Vol. 99, 117-125.

Mulinari, Daniella R, Herman J C Voorwald, Maria OH Cioffi, and Maria LCP da Silva (2017), "Cellulose fiber-reinforced high-density polyethylene composites—Mechanical and thermal properties." Journal of Composite Materials, Vol. 51 (13), 1807- 1815.

Downloads

Published

2018-09-01

How to Cite

[1]
“EXPERIMENTAL INVESTIGATION ON MECHANICAL AND THERMAL CHARACTERISTICS OF FIBER-POLYMER COMPOSITES”, JME, vol. 13, no. 3, pp. 152–157, Sep. 2018, Accessed: Oct. 04, 2024. [Online]. Available: https://smenec.org/index.php/1/article/view/129

Similar Articles

11-20 of 134

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)