EFFECT OF COPPER NANO PARTICLES ON BANANA FIBER REINFORCED POLYSTER COMPOSITES

Authors

  • Seelam Pichi Reddy Department of Mechanical Engineering, LBRCE, Mylavaram
  • Dilip Kumar K Department of Mechanical Engineering, LBRCE, Mylavaram

Keywords:

Copper nano particles, Banana fiber reinforced composite, tensile strength

Abstract

Natural fiber reinforced composites offer specific properties compared to the artificial fiber composites. Natural fibers are low cost fibers with low density and high specific strength. In the present work, copper nano particles prepared by chemical method are used as filler material in banana fiber reinforced polyester composites. The composites are prepared by hand lay-up technique.   The tensile strength, flexural strength and density of the composites are evaluated. The tensile strength, flexural strength and the density of the composites improved with the addition of copper nano particles. Scanning electron microscope is used to determine the size and shape of copper nano particles.

Downloads

Download data is not yet available.

References

Indira K N Jyotishkumar Parameswaranpillai and Sabu Thomas (2013), “Mechanical Properties and Failure Topography of Banana Fiber PF Macrocomposites Fabricated by RTM and CM Techniqques”, ISRN Polymer Science, 1-8.

Harishanand K S Nagabhushana H Nagabhushana B M Benal M M Muruli M S Raghavendra N and Vishnu Mahesh K R (2013), “Comparitive Study on Mechanical Properties of ZnO, ZrO2 and CeO2 Nanometal Oxides Reinforced Epoxy Composites”, Advances in Polymer Science and Technology, Vol. 3(1), 7-13.

Ying Zeng Hong-Yuan Liu Yiu-Wing Mai and Xu-Sheng Du (2012), “Improving Interlaminar Fracture Toughness of Carbon Fiber/Epoxy Laminates by Incorporation of Nano-particles”, Composites: Part B, Vol.43, 90-94.

Abdul H S P Khalil Fizree H M Bhat A H Jawaid M and Abdullah C K (2013), “Development and Characterization of Epoxy Nanocomposites Based on Nano- structured Oil Palm Ash”, Composites Part B.

Nagalingam R Sundaram S and Stanly Jones Retnam B (2010), “Effect of Nanoparticles on Tensile, Impact and Fatigue Properties of Fiber Reinforced Plastics”, Bull., Mater. Sci., Vol.33, (5), 525-528.

Sujesh G and Ganesan C (2012), “Tensile Behaviour of Nano Filled GFRP at Different Strain Rates”, ICMMAE, 13-15.

Molefi J A Luyt A S and Krupa I (2009), “Comparison of the Influence of Cu Micro and Nano-Particles on the Thermal Properties of Polyethylene/Cu Composites Polymer Letters”, Vol.3, (10), 639-649.

Srecko Stopic Bernd Friedrich Karlo Raic Tatjana Volkov and Marija Dimitrijevic (2009), “Characterisation of Nano-Powder Morphology Obtained By Ultrasonic Spray Pyrolysis”, MjoM, 41-53.

Downloads

Published

2017-03-01

Issue

Section

Articles

How to Cite

[1]
“EFFECT OF COPPER NANO PARTICLES ON BANANA FIBER REINFORCED POLYSTER COMPOSITES”, JME, vol. 12, no. 1, pp. 026–028, Mar. 2017, Accessed: Nov. 09, 2024. [Online]. Available: https://smenec.org/index.php/1/article/view/181

Similar Articles

1-10 of 298

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)