MODELING AND SIMULATION OF MULTI- PLATE CLUTCH ASSEMBLY TO ANALYZE THE PROPERTY VARIATION OF FRICTION PLATE
Keywords:
clutch, friction, solid works, ANSYSAbstract
Clutch is one of the fundamental segments in cars. It is situated between the motor and the apparatus box. The fundamental capacity of the clutch is to start the movement or increment the speed of the vehicle by exchanging active vitality from the flywheel. The present paper manages the outlining and investigation of behavior of clutch plates assembled in multi-plate clutch. Research is aimed to find the property variation of each friction plate while bearing torque, axial thrust and reaction from the bearing supports. The analysis is aimed to find the critical friction plate which has more probability to wear. The Configuration has done by utilizing SOLIDWORKS programming and static auxiliary examination conveyed by utilizing ANSYS.
Downloads
References
Sagar Olekar, Kiran Chaudhary, Anil Jadhav and Baskar P (2013), “Structural analysis of multiplate clutch”, IOSR Journal of Mechanical and Civil Engineering, Vol. 10(1), 07-11.
Gouse Seema Begum S, Balaraju A (2015), “Design and Analysis of Friction Clutch Plate using ANSYS” International Journal of Advanced Engineering Research and Science, Vol.2(5), ISSN: 2349-6495.
Engineering studies by peter Metcalf and roger Metcalf (2011).
Baskar P, Jadhav A, Salvi G and Ukamnal S (2013), “Static Structural Analysis of Multi plate Clutch with Different Friction Materials” Vol. 2(11) ISSN-2278-0181.
Modak J P, Shrikant V Bhoyar and Mehta G D (2013), “Dynamic Analysis Of Single Plate Friction Clutch”, IJERT, Vol. 2(7), ISSN: 2319-8753.
Raut G, Manjare A and Bhaskar P (2013), “Analysis of Multidisc Clutch Using FEA” IJETT, Vol.6, ISSN: 2231-5381.
Purohit R, Khitoliya P and Koli D K (2014), “Design and Finite Element Analysis of an Automotive Clutch Assembly”, Procedia Materials Science, Vol.6, 490-502., https://doi.org/10.1016/j.mspro.2014.07.063.
Monarch K Warambhe, Gautam R Jodh and Mamta G Pawar (2013), “Design and Analysis of Clutch Using Sintered Iron as a Friction Material”, IJITEE, Vol.3(7).
