A Comparative Study on Prediction of Cutting Force using Artificial Neural Network and Genetic Algorithm during Machining of Ti-6Al-4V

Authors

  • Rolvin Barreto Department of Mechanical Engineering, Visvesvaraya Technological University, Belagavi, Karnataka, 590018, India
  • Malagi R R Department of Mechanical Engineering, Visvesvaraya Technological University, Belagavi, Karnataka, 590018, India
  • Chougula S R Department of Mechanical Engineering, Government Polytechnic College, Belagavi, Karnataka, 590018, India

DOI:

https://doi.org/10.37255/jme.v17i3pp091-097

Keywords:

Genetic programming, Minimum quantity lubrication, Neural network, Symbolic regression , Titanium alloy

Abstract

The purpose of this comparative study is to improve the predictive accuracy of the cutting force during the turning of Ti-6Al-4V on a lathe machine. By optimizing the machining process parameters such as cutting speed, feed rate, and depth of cut, the cutting force in the machining process can be improved significantly. Cutting force is one of the crucial characteristics that must be monitored during the cutting process in order to enhance tool life and the surface finish of the workpiece. This paper is based on the experimental dataset of cutting forces collected during the turning of titanium alloy under the Minimum Quantity Lubrication (MQL) condition. To predict the cutting forces, two machine learning techniques are explored. Firstly, a black-box model called an Artificial Neural Network (ANN) is proposed to predict cutting force. Using the Levenberg-Marquardt algorithm, a two-layered feedforward neural network is built in MATLAB to predict cutting force. The second model to be implemented was the Genetic Algorithm (GA), a white-box model. GA is an optimization technique which is based on Darwinian theories. It is a probabilistic method of searching, unlike most other search algorithms, which require definite inputs. Using symbolic regression in HeuristicLab, a GA model is developed to estimate cutting force. The anticipated values of cutting forces for both models were compared. Since the ANN model had fewer errors, it was ascertained that the particular model is preferable for machining process optimization.

Downloads

Download data is not yet available.

References

D. A. Coroni and S. M. Croitoru, "Prediction of Cutting Forces at 2D Titanium Machining", 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, Vol. 69, pp. 81-89, 2014.

Yun Chen et al., "Analytical modelling of cutting forces in near-orthogonal cutting of titanium alloy Ti6Al4V", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 229, Issue 6, pp.1122-1133, 2015.

S. Sun et al., "Characteristics of cutting forces and chip formation in machining of titanium alloys", International Journal of Machine Tools and Manufacture, Vol. 49, Issues 7–8, pp. 561-568, 2009.

C. F. Wyen and K. Wegener, "Influence of cutting edge radius on cutting forces in machining titanium", CIRP Annals, Vol. 59, Issue 1, pp. 93-96, 2010.

Bin Li and Hong Wang, "Numerical simulation and prediction of cutting force in turning of titanium alloy", Advanced Materials Research, Vol. 580, pp. 63-66, 2012.

Yahui Hu et al., "Simulation and Experimental Research on Cutting Force of Turning Titanium Alloy", 7th International Conference on Mechanical and Electronics Engineering (ICMEE 2015), MATEC Web of Conferences, Vol, 31, No. 03013, 2015.

Dhamodharan N et al., "A Review of Cutting Force and Optimization In Metal Cutting Process", International Journal of Applied Engineering Research (IJAER), Vol. 10, Issue 6, pp. 15207-15224, 2015.

Bharat Sharma, "Effect Of Parameters Like Spindle Speed, Depth Of Cut And Feed Rate On The Cutting Force Of A Single Point Cutting Tool", International Journal of Engineering Applied Sciences and Technology, Vol. 4, Issue 12, pp. 525-530, 2020.

Utkaarsh Bhaskarwar et al., "Machine Learning Approach to Predict the Trends of the COVID-19 Pandemic: A survey", International Research Journal of Engineering and Technology (IRJET), Vol. 08, Issue 06, 2021.

Zoran Jurkovic et al., "A comparison of machine learning methods for cutting parameters prediction in high speed turning process", Journal of Intelligent Manufacturing, Vol. 29, pp. 1683–1693, 2018.

K. Leo Dev Wins et al., "Artificial Neural Network and Genetic Algorithm-Based Models for Predicting Cutting Force in Turning of Hardened H13 Steel", Trends in Manufacturing and Engineering Management, Part of Lecture Notes in Mechanical Engineering, Springer, 2020.

Sergio D. Cardozo et al., "Optimization of laminated composite plates and shells using genetic algorithms, neural networks and finite elements", Latin American Journal of Solids and Structures, Vol. 8, pp. 413 – 427, 2011.

C. C. Gowda and S. G. Mayya, "Comparison of Back Propagation Neural Network and Genetic Algorithm Neural Network for Stream Flow Prediction", Journal of Computational Environmental Sciences, Vol. 2014, No. 290127, 2014.

U. Mukkamala and S. R. Gunji, "Comparison of Regression Model with Multi-layer Perceptron Model While Optimizing Cutting Force Using Genetic Algorithm", Mathematical Modelling of Engineering Problems Vol. 7, No. 2, pp. 265-272, 2020.

Issam Hanafi et al., "Artificial neural networks back propagation algorithm for cutting force components predictions", Mechanics & Industry, Vol. 14, No. 6, pp. 431 – 439, 2013.

Sanjib Banerjee et al., "Artificial Neural Network Modeling of the Effect of Cutting Conditions on Cutting Force Components during Orthogonal Turning", International Journal of Current Engineering and Technology, Special Isssue-2, pp. 127-130, 2014.

Marwa Qasim Ibraheem, "Prediction of Cutting Force in Turning Process by Using Artificial Neural Network", Al-Khwarizmi Engineering Journal, Vol. 16, No. 2, pp. 34- 46, 2020.

A. V. Pradeep et al., "Optimization for Machining Parameters in Turning of AISI 52100 Steel for Manufacturing Services-Genetic Algorithm Method", International Journal of Innovative Technology and Exploring Engineering (IJITEE), Vol. 9, Issue 3, 2020.

Besart Berisha et al., "Optimization of Turning Process and Cutting Force Using Multiobjective Genetic Algorithm", Universal Journal of Mechanical Engineering, Vol. 7, No. 2, pp. 64-70, 2019.

Amit Jyoti Banerjee et al., "Analysis of Cutting Forces and Optimization of Cutting Parameters in High Speed Ball-end Milling Using Response Surface Methodology and Genetic Algorithm", International Conference on Advances in Manufacturing and Materials Engineering (ICAMME), Vol. 5, pp. 1623-1632, 2014.

M. Bagińska and P. E. Srokosz, "The Optimal ANN Model for Predicting Bearing Capacity of Shallow Foundations Trained on Scarce Data", KSCE Journal of Civil Engineering, Vol. 23, pp. 130–137, 2019.

Abhishek K et al., "Ann Modeling For Prediction Of Cutting Force Component During Orthogonal Turning", International Research Journal of Engineering and Technology (IRJET), Vol. 05, Issue 06, 2018.

Vishal S. Sharma et al., "Estimation of cutting forces and surface roughness for hard turning using neural networks", Journal of Intelligent Manufacturing, Vol. 19, pp. 473–483, 2008.

N Efkolidis et al., "Prediction of cutting forces in drilling AL6082-T6 by using artificial neural networks", IOP Conference Series: Materials Science and Engineering, Vol. 916, No. 012036, 2020.

A. Ansari and A. A. Bakar, "A Comparative Study of Three Artificial Intelligence Techniques: Genetic Algorithm, Neural Network, and Fuzzy Logic, on Scheduling Problem", 2014 4th International Conference on Artificial Intelligence with Applications in Engineering and Technology, pp. 31-36, 2014.

Ling Wang, "A hybrid genetic algorithm–neural network strategy for simulation optimization", Applied Mathematics and Computation, Vol. 170, Issue 2, pp. 1329-1343, 2005.

Cristian DINU et al., "Genetic Programming Technique Applied For Flash-Flood Modelling Using Radar Rainfall Estimates", Modelling in Civil Environmental Engineering, Vol.13, No.4, pp.27-38, 2017.

Downloads

Published

2022-09-01

How to Cite

[1]
“A Comparative Study on Prediction of Cutting Force using Artificial Neural Network and Genetic Algorithm during Machining of Ti-6Al-4V”, JME, vol. 17, no. 3, pp. 091–097, Sep. 2022, doi: 10.37255/jme.v17i3pp091-097.

Similar Articles

11-20 of 211

You may also start an advanced similarity search for this article.