Thermal Performance of Internally Grooved Heat Pipe with Different Flow Rate And Orientation

Authors

  • Aruna V Assistant professor, Smr East Coast College of Engineering and Technology, Tamilnadu, India
  • Alagappan N Assistant Professor, Annamalai University, Tamilnadu, India https://orcid.org/0000-0002-4258-8522
  • Ashokumar I Assistant Professor, Annamalai University, Tamilnadu, India

DOI:

https://doi.org/10.37255/jme.v4i2pp071-075

Keywords:

orientation, internally grooved heat pipe, flow rate, CuO nanofluid, thermal performance, efficiency

Abstract

In this present work reports an orientation and flow rate involves the thermal performance of heat pipe. Grooved heat pipe were filled with CuO nanofluid and DI water. Thermal performance and their resistance are discussed. The heat pipe is an experimentally Analyzed with different orientation and flow rate of cooling component with same heat input.

Downloads

Download data is not yet available.

References

Xue Fei Yang, Zhen-Hua Liu and Jie Zhao (2008), “Heat transfer performance of a horizontal micro-grooved heat pipe using CuO nanofluid”, Journal of Micromechanics and Microengineering, Vol. 18 (3), 035 – 03.

Guo-Shan Wang, Bin Song and Zhen-Hua Liu (2010), “Operation characteristics of cylindrical miniature grooved heat pipe using aqueous CuO nanofluids”, Experimental Thermal and Fluid Science (2010) Vol: 34 (8), 1415-1421.

Dong-ryun Shin, Seok-ho Rhi, Taek-kyu Lim and Ju-chan Jang (2011), “Comparative study on heat transfer characteristics of nanofluidic thermosyphon and grooved heat pipe”, Journal of Mechanical Science and Technology Vol: 25(6), 1391-1398.

Zhen-Hua Liu, Yuan-Yang Li and Ran Bao (2010), “Thermal performance of inclined grooved heat pipes using nanofluids”, International Journal of Thermal Sciences, Vol. 49(9), 1680-1687.

Kumaresan G, Venkatachalapathy S and Lazarus Godson Asirvatham (2014), “ Experimental investigation on enhancement in thermal characteristics of sintered wick heat pipe using CuO nanofluids” International journal of heat and mass transfer. Vol.72, 507-516.

Manimaran R, Palaniradja K, Alagumurthi N and Humain J (2014), “ Experimental comparative study of heat pipe performance using CuO & TiO2 nanofluids” , International journal of energy research, Vol. 38, 573-580.

Kumaresan G and Venkatachalapathy S (2014), “Heat transfer studies on circular heat pipe using CuO nanofluids”, International journal of mechanical and production engineering. Vol. 2, 81-84.

Gabriel Huminic, Angel Huminic, Ion Morjan and Florian Dumitrache (2011), “Experimental study of the thermal performance of thermosyphon heat pipe using iron oxide nanoparticles”, International journal of heat and mass transfer, Vol. 54, 656-661.

Taoufik Brahim and Abdelmajid Jemni (2016), “Numerical case study of packed sphere wicked heat pipe using Al2O3 and CuO based water nanofluid”, Case studies in thermal engineering, Vol. 8, 311- 321.

Waely I A Aly, Moustafa A Elbalshouny, H M Abd El- Hameed and M Fatouh (2017), “Thermal performance evaluation of a helical micro grooved heat pipe working with water and aqueous Al2O3 nanofluid at different inclination angle and filling ratio”, Applied thermal engineering, Vol. 110, 1294-1304.

Maryam Shafahi, Vincenzo Bianco, Kambiz Vafai and Oronzio Manca (2010), “An investigation of the thermal performance of cylindrical heat pipes using nanofluids”, International Journal of Heat and Mass Transfer, Vol. 53 (1-3), 376-383.

Hossien Kavusi and Davood Toghrai (2017), “ A comprehensive study of the performance of a heat pipe by using of various nanofuids”, Advanced powder technology, Vol. 28, 3074-3084.

Marayam Shafahi, Vincenzo Bianco, Kambiz Vafai and Orenzio Manca (2010), “An investigation of thermal performance of cylindrical heat pipe using nanofluids”, International journal of heat and mass transfer, Vol. 53, 376-383.

Yu – Hsing Lin, Shung- Wen Kang and Hui – Lun Chan (2008), “ Effect of silver nanofluid on pulsating heat pipe thermal performance”, Applied thermal engineering, Vol 28 (11-12), 1312-1317.

Paisarn Naphon, Pichi Assadamongkol and Teerapong Boriak (2008), “Experimental investigation of titanium nanofluids on the heat pipe thermal efficiency”, International communication on heat and mass transfer, Vol. 35, 1316-1319.

Aruna V and Alagappan N (2017), “ Performance Analysis of Grooved Heat Pipe using Nanofluiods”, Recent advance in science and engineering. Vol. 11 (8) 372-376.

Downloads

Published

2019-06-01

Issue

Section

Articles

How to Cite

[1]
“Thermal Performance of Internally Grooved Heat Pipe with Different Flow Rate And Orientation ”, JME, vol. 14, no. 2, pp. 071–075, Jun. 2019, doi: 10.37255/jme.v4i2pp071-075.

Similar Articles

31-40 of 320

You may also start an advanced similarity search for this article.