Failure Prediction Using Improved Interactive Failure Criteria for Wind Turbine Blade

Authors

  • Selwin Rajadurai1 J 1Lecturer, Department of Mechanical Engineering, Government College of Engineering, Tirunelveli-627 007

Keywords:

Wind turbine blade, matrix failure, failure envelope, action plane coefficients, FPCL coding, ply by ply discount method, transverse stress.

Abstract

Wind energy is a non polluting cost-effective renewable energy source. Wind power technology in India has grown to many folds in the last decade. Capacity of wind turbines have been increased significantly and at the same time, the cost of generating power from wind has come down. The blades used in the wind turbine are of composite material with aerodynamic profile, twisted tip and varying thickness along its length. Composite wind turbine blades are observed to fail due to matrix compression. Available failure theories are not capable of predicting the maximum stress in transverse compressive – shear stress region. Hence a new set of failure criteria for predicting the failure of composite wind turbine blade is proposed. The criterion is examined with both unidirectional and bidirectional experimental results for wind turbine blade material. The results of failure prediction of unidirectional lamina and multi directional laminate are encouraging. The stress strain prediction is also compared with experimental data sets. The proposed criterion is compared with the criterion proposed by the participants of World wide Failure Exercise (WWFE). The criterion is further extended to composite laminate using classical lamination theory and ply by ply discount procedure using specially designed coding (FPCL). The coding accepts the effect of non linearity and thermal effects. Using the coding it is possible to predict initial and final failure, delamination and mode of failure.

Downloads

Download data is not yet available.

References

Omri Rand, Shirley M.Barkai, “A refined non linear analysis of pre-twisted composite blades”, Composite Structures Vol.39, pp.39 – 54, (1997).

Bechly.M.E and Clausen.P.D, Structural design of a composite wind turbine blade using finite element analysis, Computers and Structures, Vol.63, No.3, pp.639-646, (1997).

M.M. Shokrieh and R. Rafiee, “Simulation of fatigue failure in a full composite wind turbine blade”, Composite Structures, Vol.74, pp.332-342 (2006)

Mallick.P.K, 1993 “Fiber Reinforced Composites” Marcel Dekker, Inc New York

Agarwal, D, Broutman J, 1987, “Analysis and Performance of Fiber composites”, A Wiley – Interscience Publication, New York

“Guidelines for Design of Wind Turbines”, Developed by Risoe National Laboratory and Det Norske Veritas, Second Edition (2002).

Cuntze, R.G., “The predictive capability of failure mode concept based strength criteria for multidirectional laminates – part B”, Composites Science and Technology, Vol.64, pp.487–516, (2004).

Eckold, G. C., “Failure criteria for use in the design environment”, Composites Science and Technology, Vol. 58, No.7, pp. 1095 – 1106, (1998).

Edge, E. C., “Stress based Grant-Sanders method for predicting failure of composite laminates”, Composites Science and Technology, Vol. 58, No.7, pp. 1033 – 1045, (1998).

Hart-Smith, L. J., “Predictions of a generalized maximum shear-stress failure criterion for certain fibrous composite laminates”, Composites Science and Technology, Vol. 58, No.7, pp. 1179 – 1208, (1998).

Hart-Smith, L. J., “Predictions of the original and truncated maximum-strain failure models for certain fibrous composite laminates”, Composites Science and Technology, Vol. 58, No.7, pp. 1151 – 1178, (1998).

Hart-Smith, L. J., “Prediction of failure using an interactive failure criteria”, Composites Science and Technology, Vol. 62, pp. 1591 – 1618, (2002).

Hashin, Z., “Failure Criteria for Unidirectional Fiber Composites,” Journal of Applied Mechanics, Vol. 47, pp. 329-334, (1980).

Puck, A., and Schurmann, H., "Failure Analysis of FRP Laminates by Means of Physically Based Phenomenological Models," Composites Science and Technology, Vol. 58, No. 7, pp. 1045-1067, (1998).

Rotem, A., “Prediction of laminate failure with the Rotem failure criterion”, Composites Science and Technology, Vol. 58, No.7, pp. 1083 – 1094, (1998).

Sun, C.T., Quinn, B.J., and Oplinger, D.W., "Comparative Evaluation of Failure Analysis Methods for Composite Laminates," DOT/FAA/AR-95/109, (1996).

Tsai.S.W, and Wu.E.M., “A generalized Theory of Strength for Anisotropic Materials”, Journal of composite Materials, Vol.5, pp.58–80, (1971).

Wolfe, W. E. and Butalia, T. S., “A strain-energy based failure criterion for nonlinear analysis of composite laminates subjected to biaxial loading”, Composites Science and Technology, Vol. 58, No.7, pp. 1107 – 1119, (1998).

Zinoviev, P. et al, “Strength of multilayered composites under plane stress state”, Composites Science and Technology, Vol. 58, No.7, pp. 1209 – 1217, (1998).

John F. Mandall, Daniel D. Samborsky, Douglas.S. Cairns, “Fatigue of Composite Materials and Substructures for Wind Turbine Blades”, Sandia National Laboratories, Albuquerque, California, Sandia Report No. SAND2002-0771, (2002).

Published

2008-03-01

Issue

Section

Articles

How to Cite

[1]
“Failure Prediction Using Improved Interactive Failure Criteria for Wind Turbine Blade ”, JME, vol. 3, no. 1, pp. 54–62, Mar. 2008, Accessed: Oct. 04, 2024. [Online]. Available: https://smenec.org/index.php/1/article/view/659

Similar Articles

1-10 of 281

You may also start an advanced similarity search for this article.