Live Dimension Detection During Machining of Workpiece using Smart Detection Set up on General-Purpose Lathe

Authors

  • Sushil V Deshpande Department of Mechanical Engineering, Maharashtra Institute of Technology, Aurangabad, Maharashtra-431010, India
  • Ramkisan S Pawar Department of Mechanical Engineering, Padmabhooshan Vasantdada Patil Institute of Technology, Pune, Maharashtra-411021, India
  • Pushparaj S Warke Department of Mechanical Engineering, Dr.D Y Patil Institute of Technology, Pune, Maharashtra-411018, India

DOI:

https://doi.org/10.37255/jme.v19i3pp089-100

Keywords:

Stepped Shaft, Real-Time Profile Dimension Detec-tion, Laser Line Sensor, Algo-rithm, Inspection Stage, Manufac-turing Time

Abstract

In a manufacturing setting, the profile dimensions of the workpiece are key quality factors. Various automatic inspection approaches currently assess dimensions based on characteristics and variables, tool paths as OK or Not OK in CNC, and online inspection methods for other machines after manufacturing. However, continuous on-machine profile dimensions and simultaneous manufacturing were left to focus. An intelligent recognition system based on a laser lines sensor using a smart profile dimension detection algorithm (SPDA) communicates real-time measurement information to the operator. It plots the current status of the Workpiece, mapping linear distance by accurate laser reflection of the exact mid-surface line of the workpiece as profile data of a symmetric shaft. It compares the length-diameter obtained from longitudinal and lateral sensors with the master data provided. The algorithm implements Python libraries for displaying panels and organizing workpieces. The standard image changes color from red to green as it is relevant to the status. The predetermined order of manufacturing parts and gradient descent optimization feature sets benchmarks to display the status of the workpiece. The real-time live measurement is facilitated with an error of less than 10%, i.e., 0.1 mm, saving manufacturing time by 30%. It also eliminates the inspection stage, and no reduced job rejection is found.

Downloads

Download data is not yet available.

References

1. J. Ivanov and T. Jaff, "Manufacturing Lead Time Reduction and Its Effect on Internal Supply Chain," in *Sustainable Design and Manufacturing*, G. Campana, R. Howlett, R. Setchi, and B. Cimatti, Eds. 2017, vol. 68, pp. 398-407.

2. İ. M. Orak and Ş. Şeker, "Sectional Dimensions Identification of Metal Profile by Image Processing," *Journal of Computer and Communications*, vol. 11, pp. 107-120, 2023.

3. X. Li, Y. Yang, Y. Ye, S. Ma, and T. Hu, "An online visual measurement method for workpiece dimension based on deep learning," *Measurement*, vol. 185, 2021.

4. Y. Liu, Y. Mei, C. Sun, R. Li, X. Wang, H. Wang, J. Tan, and Q. Lu, "A novel cylindrical profile measurement model and errors separation method applied to stepped shafts precision model engineering," *Measurement*, vol. 188, 2022.

5. E. S. Gadelmawla, "Computer vision algorithms for measurement and inspection of external screw threads," *Measurement*, vol. 100, pp. 36-49, 2017.

6. Z. Dong, X. Sun, C. Chen, and M. Sun, "A fast and on-machine measuring system using the laser displacement sensor for the contour parameters of the drill pipe thread," *Sensors*, vol. 18, no. 4, p. 1192, 2018.

7. J. K. Che and M. M. Ratnam, "Real-time monitoring of workpiece diameter while turning by vision method," *Measurement*, vol. 126, pp. 369-377, 2018.

8. P. Hu, X. Xiong, W. Zhang, B. Ju, and Y. Chen, "Accurate inner profile measurement of a high aspect ratio aspheric workpiece using a two-probe measuring system," *Applied Sciences*, vol. 12, p. 6628, 2022.

9. V. R. Mamilla, S. M. Srinivasulu, and N. M. Prasad, "Study on computer numerical control (CNC) machines," *International Journal of Advanced Scientific Research*, vol. 1, no. 1, pp. 21-25, Apr. 2016.

10. Y. S. Suh, "Laser sensors for displacement, distance, and position," *Sensors*, vol. 19, no. 8, p. 1924, 2019.

11. X. Q. Li, Z. Wang, and L. H. Fu, "A laser-based measuring system for online quality control of car engine block," *Sensors*, vol. 16, no. 11, p. 1877, 2016.

12. E. Strömstedt, O. Svensson, and M. Leijon, "A set-up of 7 laser triangulation sensors and a draw-wire sensor for measuring relative displacement of a piston rod mechanical lead-through transmission in an offshore wave energy converter on the ocean floor," *Journal of Marine Science and Engineering*, vol. 2012, Mar. 2012.

13. H. D. Ghael, L. Solanki, and G. Sahu, "A review paper on Raspberry Pi and its applications," *International Journal of Advanced Engineering and Management*, vol. 2, no. 12, pp. 225-227, Jan. 2021.

14. J. Jurko, M. Miškiv-Pavlík, V. Hladký, P. Lazorík, P. Michalík, and I. Petruška, "Measurement of the machined surface diameter by a laser triangulation sensor and optimization of turning conditions based on the diameter deviation and tool wear by GRA and ANOVA," *Applied Sciences*, vol. 12, p. 5266, 2022.

15. J. G. D. M. Franca, M. A. Gazziro, A. N. Ide, and J. H. Saito, "A 3D scanning system based on laser triangulation and variable field of view," in *Proceedings of the IEEE International Conference on Image Processing*, Genova, Italy, 2005, pp. I-425.

16. M. Shiraishi, H. Sumiya, and S. Aoshima, "In-process diameter measurement of turned workpiece with curvatures by using sensor positioning," *ASME Journal of Manufacturing Science and Engineering*, vol. 128, no. 1, pp. 188-193, Feb. 2006.

1. Vrochidis, P. Charalampous, N. Dimitriou, N. Kladovasilakis, M. Chatzakis, G. Georgiadis, D. Tzovaras, and S. Krinidis, "Automatic elevator shaft inspection using a multi-sensor measuring system and computer vision techniques," *Journal of Building Engineering*, vol. 82, 2024.

17. D. Ding, W. Ding, R. Huang, Y. Fu, and F. Xu, "Research progress of laser triangulation on-machine measurement technology for complex surface: A review," *Measurement*, vol. 216, 2023.

18. R. Duwal, "Image processing using OpenCV," Feb. 2024.

19. M. M. Azad, et al., "Color image processing in digital image," *International Journal of New Technology and Research*, vol. 3, no. 3, Mar. 2017.

20. D. B. Beniz and A. M. Espindola, "Using Tkinter of Python to create a graphical user interface (GUI) for scripts in LNLS," in *Proceedings of PCaPAC*, Campinas, Brazil, 2016.

Downloads

Published

2024-09-01

How to Cite

[1]
“Live Dimension Detection During Machining of Workpiece using Smart Detection Set up on General-Purpose Lathe”, JME, vol. 19, no. 3, pp. 089–100, Sep. 2024, doi: 10.37255/jme.v19i3pp089-100.

Similar Articles

1-10 of 411

You may also start an advanced similarity search for this article.