WEAR UNDER LUBRICATED SLIDING CONTACTS - A DIMENSIONAL ANALYSIS MODEL

Authors

  • Bachchhav B D Sinhgad College of Engineering, Pune, Maharashtra-411 041, India
  • Lathkar G S MGM’s College of Engineering, Hingoli Road, Nanded, Maharashtra-431 605, India
  • Reddy Y P Sinhgad College of Engineering, Pune, Maharashtra-411 041, India
  • Bagchi H Sinhgad College of Engineering, Pune, Maharashtra-411 041, India

Keywords:

Wear, Dimensional Analysis, Deep drawing , Additives

Abstract

The aim of this research was to investigate and analyze the wear of commonly used die material (AISI 4140) under lubricated sliding contact with low carbon steel sheet. Mineral based oil blended with sulfur and ester was used. A mathematical model considering lump parameters was developed using dimensional analysis technique. Tribo-experiments were conducted on a dedicated test set-up which simulates the actual contact conditions as in sheet metal drawing operation. This paper highlighted the wear characteristics of a lubricant containing specific additives under sliding contact conditions to anticipate the wear so as to render it a suitable lubricant for deep drawing operation.

Downloads

Download data is not yet available.

References

ASM Handbook (1992), “Friction Lubrication and Wear”, Vol. 18, ASM International, USA.

Monetti C, Ilo S, and Lebersorger T (2009), “Characterization of Lubricants for Metal Forming by Means of an Oscillating Tribo-test-rig”, Journal of Engineering Tribology, Vol. 223, 817-826.

Lazzarotto L, Dubar L, Dubois A, Ravassard P, Bricout J P, and Oudin J (1998), “A Selection Methodology for Lubricating Oils in Cold Metal Forming Processes”, Wear, Vol. 215, 1-9.

Bech J, Bay N and Eriksen M (1998), “A study of mechanism of liquid lubrication in metal forming”, Annals of the CIRP, Vol. 47, Issue: 1, pp. 221-226.

Bachchhav B D, Lathkar G S and Bagchi H (2011), “A study of tribo-characteristics of deep drawing oils”, Journal of Manufacturing Engineering, Vol. 6, Issue 3, pp. 147-152.

Bachchhav B D, Lathkar G S and Bagchi H,(2012), “Tribology of ester added lubricants” Journal of Tribology and Surface Engineering, Vol. 3, Issue: 1-2, pp.87-94.

Ludema K C, (1996) “Friction, Wear, Lubrication: A Textbook in Tribology”, CRC Press, London, New York.

Bachchhav B D, Lathkar G S and Bagchi H (2011), “General tribological evaluation of deep drawing oils”, Journal of Manufacturing Technology Today, Vol. 10, Issue 9, pp. 12-16.

Downloads

Published

2013-09-01

How to Cite

[1]
“WEAR UNDER LUBRICATED SLIDING CONTACTS - A DIMENSIONAL ANALYSIS MODEL”, JME, vol. 8, no. 3, pp. 139–144, Sep. 2013, Accessed: Dec. 23, 2024. [Online]. Available: https://smenec.org/index.php/1/article/view/310

Similar Articles

51-60 of 309

You may also start an advanced similarity search for this article.