EFFECT OF TIG WELDING ON ALUMINIUM MATRIX COMPOSITE

Authors

  • Sakthi Vadivel K Department of Mechanical Engineering, Builders Engineering College, Nathakadaiyur, Tamil Nadu- 638108, India
  • Sivaraj C Department of Mechanical Engineering, Builders Engineering College, Nathakadaiyur, Tamil Nadu- 638108, India
  • Vigneshwaran K Department of Mechanical Engineering, Builders Engineering College, Nathakadaiyur, Tamil Nadu- 638108, India

DOI:

https://doi.org/10.37255/jme.v18i2pp071-079

Keywords:

Surface Roughness, Cutting Fluid, Groundnut oil, Coconut Oil, Turning Process

Abstract

Metal Matrix Composite has evoked a keen interest in potential applications in aerospace and automotive industries, owing to their superior strength-to-weight ratio and temperature resistance. Nowadays, welding strength on composite materials is more essential. So, in this project, we consider the effect of TIG welding on aluminium matrix composite (Al & Sn). The TIG welding on aluminium alloys like (Al 6061& Al 6063) has lost its welding strength by around 30% in Al 6063 & 50% in Al 6061. To regain the welding strength, we need a heat treatment process like hardening and tempering, which is a more costly and time-consuming one. To eradicate this problem, we will mix the malleable Tin (Sn) in different ratios of 90:10 and 85:15 for the aluminium alloys (Al 6061 & Al 6063). Then analyzing the effect of TIG welding on the aluminium metal matrix, the welding strength of the aluminium metal matrix composite is increased by 5% compared to the previous material.

Downloads

Download data is not yet available.

References

Sakthi Vadivel, K and Govindasamy, P., 2021 “Characterization of natural cellulosic fiber from Treated Acacia Arabica and Pencil Cactus Fiber”, Materials Today: Proceedings, Vol. 46 (9), Pg. No. 3392-3397.

T. Senthil Kumar, V. Balasubramanian and M.Y. Sanavullah (2007), “Influences of pulsed current tungsten inert gas welding parameters on the tensile properties of AA 6061 aluminium alloy”, Materials and Design Vol. 28, pp. 2080-2092.

Sakthi Vadivel, K and Govindasamy, P., 2021 “Mechanical and Water Absorption Properties of Acacia Arabica Bark Fiber/Polyester Composites: Effect of Alkali Treatment and Fiber Volume Fraction”, Materials Today: Proceedings, Vol. 46 (6), Pg. No. 2281-2287.

R. Ahmad and M.A. Bakar (2011), “Effect of a post-weld heat treatment on the mechanical and microstructure properties of AA6061 joints welded by the gas metal arc welding cold metal transfer method”, Materials and Design Vol. 32, pp. 5120-5126.

Sakthi Vadivel, K and Govindasamy, P., 2020 “Thermal Analysis of Acacia Arabica and Pencil Cactus fiber hybrid polymer Composites”, Research Journal of Chemistry and Environment, Vol. 24(Special Issue 1), Pg. No. 52.

Sakthi Vadivel, K and Govindasamy, P., 2013, “An erimental Investigation on Hybrid Polymeric Composite Material Reinforced with Sisal and Acacia Fiber”, Composites and Nanocomposites, pp.117-128 - Apple Academic Press / Taylor & Francis Group.

Wang Xi-he, Niu Ji-tai, Guan Shao-kang, Wang Le-jun and Cheng Dong- feng (2009), “Investigation on TIG welding of SiCp-reinforced aluminum– matrix composite using mixed shielding gas and Al–Si filler”, Materials Science and Engineering Vol. A 499, pp. 106-110.

Sakthi Vadivel, K., Sivaraj C and Vigneshwaran K., 2022 “Experimental Investigation of Tool Wear and Surface Roughness by the Influence of Various Cutting Fluids in Turning Operation”, Journal of Manufacturing Engineering, Vol. 17 (1), Pg. No. 001-007.

Yaqiong Li, Yi Tan, Jiayan Li, Qiang Xu and Yao Liu (2014), “Effect of Sn content on microstructure and boron distribution in Si–Al alloy”, Journal of Alloys and Compounds Vol. 583, pp.85-90.

Sakthi Vadivel K, Vigneshwaran K, Sivaraj C., 2021 “Study on the Mechanical Properties of Roselle Fiber and Palm Seed Powder Reinforced Epoxy Hybrid Composites”, Journal of Manufacturing Engineering, Vol.16 (1), Pg. No. 001-006.

L. Liu, L.J. He, J.G. Qi, B. Wang, Z.F. Zhao, J. Shang and Y. Zhang (2016), “Effects of Sn element on microstructure and properties of SnxAl2.5FeCoNiCu multi-component alloys”, Journal of Alloys and Compounds Vol. 654, pp. 327-332.

Xiao-dong Qi and Li-ming Liu (2012), “Fusion welding of Fe-added lap joints between AZ31B magnesium alloy and 6061 aluminum alloy by hybrid laser–tungsten inert gas welding technique”, Materials and Design Vol. 33, pp. 436-432.

Sakthi Vadivel, K and Govindasamy, P., 2018, “Electrical properties of alkali treated Acacia and Cactus fiber reinforced hybrid polyester composites”, Journal of Electrical Engineering, ISSN 1582-4594, Vol. 20(2), Pg. No. 76-81.

Liang Zhang, Xiaoyan Li, Zuoren Nie, Hui Huang and Lanqiang Niu (2016), “Comparison of microstructure and mechanical properties of TIG and laser welding joints of a new Al–Zn–Mg–Cu alloy”, Materials and Design Vol. 92, pp. 880-887.

Sakthi Vadivel, K., Sivaraj C and Vigneshwaran K., 2021 “Troubleshooting of Raw Material Handling in Bagasse Pulping”, Journal of Manufacturing Engineering, Vol. 16 (3), Pg. No. 092-107.

Published

2023-06-01

Issue

Section

Articles

How to Cite

[1]
“EFFECT OF TIG WELDING ON ALUMINIUM MATRIX COMPOSITE”, JME, vol. 18, no. 2, pp. 071–079, Jun. 2023, doi: 10.37255/jme.v18i2pp071-079.

Similar Articles

1-10 of 376

You may also start an advanced similarity search for this article.