EXAMINATION OF WELDING PARAMETERS FOR STRENGTH ANALYSIS IN FRICTION WELDING

Authors

  • Praveen R School of Mechanical Engineering, SRM University, Kattankulathur, 603203, Tamilnadu, India.
  • Rajasekaran T School of Mechanical Engineering, SRM University, Kattankulathur, 603203, Tamilnadu, India.
  • Rajkumar S Centre for Materials Joining and Research (CEMAJOR) ,Department of Manufacturing Engineering, Annamalai University, Annamalai Nagar - 608 002 ,Tamil Nadu, India.
  • Balasubramanian V Centre for Materials Joining and Research (CEMAJOR) ,Department of Manufacturing Engineering, Annamalai University, Annamalai Nagar - 608 002 ,Tamil Nadu, India.

Keywords:

Austenitic, Titanium, Friction welding, Tensile test , Microstructure

Abstract

Friction welding is one of the higher state, economical, highly productive method used to join different metallic materials. Advantages of this welding are low production time, high material save. It is also possible to join circular as well as rectangular cross sections. In friction welding joining occurs below the melting temperature of the work piece. The dissimilar metal joint of Titanium and 304 Stainless Steel is essential in the nuclear industry for the dissolution of spent fuel that is carried out boiling nitric acid in the dissolved solution. Welding dissimilar materials makes use of advantages of different materials to unique solutions, like combination of good mechanical properties such as specific weight, corrosion resistance etc.

In this project, Friction welding is carried out on two dissimilar materials such as 304 Stainless Steel and Titanium grade 5. Welding is carried out by varying different parameters such as spindle speed, upset pressure, upset time and subjected to mechanical testing such as tensile and hardness to study the effect of welding parameters. Further microstructure of the flash is examined through optical microscope.

Downloads

Download data is not yet available.

References

Benjamin Nibel W, “Modern Manufacturing Process Enginnering, 627-628.

Rao P N, “Manufacturing Technology”, Foundry, Forming and Welding, 385.

Wanjara B, “A Text Book Of Workshop Technology”, Manufacturing process, 287-289.

Dey H C, Ashfaq M, Bhaduri A K and Prasad Rao K (2009), “Joining of titanium to 304L stainless steel by friction welding”, Journal of Materials Processing Technology, Vol. 209, 5862–5870.

Meshram S D, Mohandas T and Madhusudhan Reddy G (2004), “Friction welding of dissimilar pure metals”, Journal of Materials Processing Technology, Vol. 184, 330–337.

Wen-Ya Li, Tiejun Ma, Jinglong Li (2010), “Numerical simulation of linear friction welding of titanium alloy: Effects of processing parameters”, Materials and Design, Vol. 31, 1497– 1507.

Hazman Seli, Ahmad Izani Md Ismail, Endri Rachman and Zainal Arifin Ahmad (2012), “Mechanical evaluation and thermal modelling of friction welding of mild steel and aluminium”, Journal of Materials Processing Technology, Vol. 210, 1209-1216.

Lee D G, Jang K C, Kuk J M and Kim IS (2004), “Fatigue properties of inertia dissimilar friction-welded stainless steels”, Journal of Materials Processing Technology, 155–156, 1402– 140.

Fuji A, North T H, Ameyama K and Futamata M (1992), “ Improving tensile strength and bend ductility of titanium/AISI 304L stainless steel friction welds”, Materials Science and Technology Vol. 8, 219–235.

Reddy G M, Mohandas T, Rao A S and Satyanarayana Y (2009), “Influence of welding processes on microstructure and mechanical properties of dissimilar austenitic–ferritic stainless steel welds”, Materials and Manufacturing Processes, Vol. 20, 147–173.

Downloads

Published

2014-09-01

How to Cite

[1]
“EXAMINATION OF WELDING PARAMETERS FOR STRENGTH ANALYSIS IN FRICTION WELDING”, JME, vol. 9, no. 3, pp. 186–189, Sep. 2014, Accessed: Oct. 04, 2024. [Online]. Available: https://smenec.org/index.php/1/article/view/271

Similar Articles

1-10 of 268

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)

1 2 3 4 5 > >>